Microscan HawkEye 1600T, Manual

Page: 24 / 79

Chapter 2 System Components
2-4 HawkEye™ 1600T Smart Camera Guide Rev. 1G, Dec 2008
Serial Port Connectivity
FrontRunner always communicates over Ethernet with the HawkEye™ 1600T
Smart Camera; however, the Serial port is fully supported by the Job in the form
of allowing Serial triggers and Serial ASCII reporting output via the Acquire,
Digital Input and Formatted Output Tools.
The serial string(s) are formatted using the *printf C syntax*. Special characters
can be used and are summarized in Table 2–3.
Reports &
Statistics Control
Port TCP 49202 Allow control over a Report Connection, in particular
update rate and allows records to be added/removed
from the connection.
Serial TCP Ports TCP 49211
49212
49213
49214 Send Formatted Output Strings serially over TCP as
programmed in the avp by the Formatted Output Step
Camera
Login/Command
Port UDP 49493 Gains control to the camera in order to edit and modify
its network parameters. A network login to the camera
is required to gain control with the HE1600T.
Camera Announce
Port UDP 49495 Broadcasts HE1600T Smart Camera identity on the
current subnet used by Network View in FrontRunner,
provides general counters, camera name, IP, IP in
control, camera status, and camera software version.
TABLE 2–3.
Special Characters
Sequence Output Character
\a Bell (alert)
\b Backspace
\f Formfeed
\n New line
\r Carriage return
\t Horizontal tab
\v Vertical tab
\' Single quotation mark
TABLE 2–2.
HawkEye™ 1600T TCP/IP Connectivity (Continued)
Port Name Protocol Number Note