2.4.
Mount the camera in the desired surveillance location with the mounting arm,
then point the camera to the desired surveillance position. The camera should be placed
in an area which receives an adequate amount of direct sunlight throughout the day,
however the solar panels do not require alignment with the sun. The locking mounting
bracket will allow the camera to remain in this position after it is installed.
Step 3: Configuring the MiniHub Wireless Video Hub to View
Video
3.1.
After the MiniHub is powered on and the Rugged-i camera(s) has been placed in
its desired location, the MiniHub can be configured.
3.2.
On the MiniHub computer desktop, launch the Demo icon located in the top left
corner.
MiniHub Computer Desktop
3.3.
This will launch the camera association input window. At the “
enter
password”
prompt, enter the password,
demo.
3.4.
At the “
enter wifi channel
” prompt, enter an available wireless channel.
Camera Association Input Window
3.5.
The hub will then begin the camera association process and the camera image will
appear on the screen.
Installation Guide v1.1
©2011 MicroPower Technologies, Inc.
3
