10. STARTING A RECORDING WITH HOOKUP RS
HookUp RS is the programming software to set-up, initialize and start Spider SAS. It allows
to quickly review the parameters of the recording and the signal quality before starting the
recording.
There are 2 recording modes:
― SAS mode: ECG + SAS recording for 1 or 2 nights if PhysioHub is connected to the
Spider SAS when launching HookUp RS
― Holter mode: 24 or 48 hours continuous ECG only if PhysioHub is not connected to the
Spider SAS when launching the HookUp RS
GENERAL DESCRIPTION
➊
Setup Menu
[Setup]
➀
Threshold SpO2 [
Threshold SpO
2
]
Value can be adjusted by clicking on the dropdown list (see above). This function just modifies
the position of the blue line of the
[SpO
2
– Plethysmo]
windows (see § 10.5).
10.1.
10. STARTING A RECORDING WITH HOOKUP RS
SPIDER SAS – PHYSIO HUB – HOOKUP RS – U908F
35
