Printer Operation
2-8
There are two possibilities for the displacement to become active:
If a positive displacement is set before starting the print job the printer will move the paper
into the right position first and then start printing.
If the displacement is set during a print job, the printer prints the contents of the print
buffer. Afterwards, the displacement will become active. All following data are at the new
position.
Pressing [START/STOP]
The printer changes into the LOCAL mode (displayed) and turns on the STOP indicator. All printer
and paper handling operations are stopped. After pressing
again, the printer quits the
LOCAL or Menu mode.
Meaning of the Lower Row Keys in the LOCAL Mode
Insert or Eject key
After pressing the Insert/Eject key, fanfold paper from the park position is fed into the print
position, and fanfold paper from the print position is fed into the cut/tear off position
(depending on the setting or the printer type). Paper that has been retracted into the
cut/tear off by the Insert/Eject key will be moved automatically into the print position once
the printer receives a print command
Note:
This key is not active while the top cover is open.
The Paper Feed Key and the Reverse Paper Feed Key
The paper moves
1
/
90
Inch (0,28 mm)
in the direction of the arrows. Holding down the key
results in continuous feeding.
Forward movement of paper from the park position is stopped at the print position. Forward
movement of paper from the print position is stopped at the tear off position or it will be cut off
(depending of the setting or of the printer type). Backward movement of paper is stopped at
either the park position, the print position or the tear off position.
Note:
The printer automatically feeds the paper from the selected paper source. In the event of a
paper jam, the keys , and can be use for paper transportation.
START/STOP-Key
turns off the STOP indicator
makes the printer ready for operation
either starts the printout or self-test functions when selected (see MENU mode) or
causes the interface status to change to READY or BUSY (displayed)
Exits the MENU mode.
Summary of Contents for PP 404
