Once the
Wings Trailing Edge Spars
are
glued on,
glue in place the
Wings Leading Edge Spars.
Wing Tips Construction
Lay the wing tips parts out and check that you know
where they all fit. The ribs are in order from largest to
smallest.
As with the wing construction, first start with the
second ribs in as shown here and glue them in place.
Then set the frame on a flat surface and ensure all
four points sit flat on the surface. Allow to dry before
proceeding because these two ribs will be used to
align all the others.
Work on both wing tips at the same time swapping
from one to the other to allow for drying.
Note: Make sure you build each wing tip as per the plan so that you don’t have two the same!
Continue to glue in all the
WingTip Ribs
and
Wing
Tip Half Ribs
, looking along the leading edge to
ensure they are all lined up straight.
Once the ribs are dry, glue in place the
WingTip
Trailing Edge Spar
.
