Receivers
The kit doesn’t come with a receiver or servos so it is up to you to choose which one is best for
your needs. You may have a receiver from another model which you can fit. The two receivers
below are suggested for this model.
Option1 – Micro Receiver for Servos
Option 2 – Brick Style Receiver
Receiver 4Ch DSMX With 2A ESC
Receiver 24R6CLV11 DSM2 Brick
Servo 5320 Black SH
If using a receiver and servos, the receiver is
mounted above the mounting board opposite
the battery as shown above.
If using servos, this spacer board is needed
and is placed on top of the mounting board
to allow the bottom of the servos to clear
with wings.
If using a brick style receiver, it is mounted as
shown above. Use hot glue, or the supplied
hook and loop tape to hold it in place.
If using a brick style receiver, the spacer
boad is not needed.
Battery Info:
We recommend a small 100mah battery such as
the one below. These are available on the MicronWings
website for postage within Australia only.
Note:
Servo arm used is the short one.
Control linkages attach to the outermost hole
