MR430 Firmware Update/Flash Procedure
Page 3 of 6
Reprogramming MR430 Firmware
Over time as the firmware functionality is expanded, it may become necessary to reprogram the
firmware. The firmware resides in permanent flash memory which can be re-programmed with the
appropriate software.
Download from the Micronor web site:
-
FLASH_MR430.zip
Extract the *.msi file and install this software on your PC.
Request from Micronor or the authorized Service representative the new Firmware:
-
MR430-1_V1pxpxx.hex (for DIN Rail version)
Setup the MR430-1 as
shown to the left.
Connect the USB cable to
the PC.
Power the unit with a
suitable 24V DC supply.
Prepare a paper clip or a
small pin able to reach the
Home/Reset button on the
MR430-1 unit.
