Micronor MR380-1-3, Instruction Manual

Page: 10 / 29

MR380-1-3 Instruction Manual
Page 10 of 29
Mounting the MR387 E-Stop Switch
When mounting the E-Stop switch into a panel, provide a cut-out as dimensionally shown below
in Figure 5 and the Mechanical Reference Drawing in Section 9.2 .
Refer to Figure 6 below for switch orientation. Secure panel-mount switch with all appropriate
designations and requirements.
Figure 6. E-Stop Switch Orientation Interchangeable when Mounting into Optical Block
Figure 5. Panel Cut Out Dimensions and Assembly Hierarchy of E-Stop Switch
Mushroom Push
Mounting
Panel Lock Washer
Gasket
2-56 x 3/16
Panhead Philips