PP-18
Piezo Positioner Stage
8
Rev: 1.3
MICRONIX USA,LLC
www.micronixusa.com
Reference Manual
5.
4B
Connecting the PP-18
5.1
17B
Atmospheric Environments
For controller information refer to the appropriate MMC controller manual.
31B
Closed Loop/Encoder Installation & Wiring Diagram
5.1.1
Digital Encoder Wiring Diagram
For a PP-18 with a digital encoder, connect the stage as shown below using
the supplied 15 to 9 pin cable to connect the Encoder Module to the
Controller.
Standard Cable Description:
A.
PP-18 Cable (Male Dsub 15 Pin Connector, 1.5m, Silver Braided Cable)
B.
Motor Cable (Female Dsub 15 Pin to Male Dsub 9 Pin, 1.5m, White Teflon cable)
C.
Encoder Cable (Female Dsub 15 Pin to Female Dsub 9 Pin, 1.5m, White Teflon cable)
MMC-10
Controller
