MP-
21
Linear Actuator
Rev: 3.07
5
Reference Manual
MICRONIX USA,LLC
www.micronixusa.com
3.
Preparing to Install the MP-21
3.1
Installation Preparation
The actuator is calibrated and guaranteed to be within specification at 20°C
±5°C. Be sure to use the actuator under the following conditions:
▪
Mount to a clean and flat surface which is free of debris, burrs or dings
▪
An indoor atmosphere free of corrosive gases, excessive dust, and
condensation
▪
Temperature range of 0-40°C
▪
Relative humidity between 20-80%
▪
Locate away from water, heat, and electrical noise
3.2
Package Contents
If product is damaged or there are missing components, contact MICRONIX USA
immediately. Do not discard product packaging in case of return shipment.
Package Should Contain:
▪
MP-21 Linear Actuator
▪
Locking Nut & Wrench
▪
Reference Manual
▪
Any other previously agreed upon components such as a controller and
cable
