M6Me System Board Manual
Chapter 4: The BIOS Setup Utility
46
Set Supervisor Password
Press the ENTER key to enter the Supervisor Password
submenu.
Type the password and press the ENTER key. Retype the
password and press the ENTER key again. Write down
the password somewhere safe so it will not be forgotten.
The password may be disabled by setting the new pass-
word to nothing (pressing the ENTER key without first
typing a password).
WARNING: If you forget the Supervisor Password, it cannot
be disabled without discharging the CMOS.
Set User Password
Follow the same procedure used to set the Supervisor
Password.
NOTE: After a password is entered, it is saved immediately.
All other changes may still be discarded (see Exit Screen).
Figure 4-7: Supervisor Password Submenu
