SETUP Prompt
When enabled, this category allows the system to display the “Press <F2> to
enter SETUP” message during boot.
Post Errors
When enabled, this category allows the system to display the “Press <F1> to
resume, <F2> to SETUP” and pause if errors occur during boot. If disabled,
the system will ignore any errors and will always attempt to boot.
Floppy Check
When enabled, this category verifies the floppy drive is installed on boot. For
faster booting, select DISABLED.
Numlock
Setting this to Enabled will activate Numlock upon boot. Setting this to Auto
will activate Numlock if the BIOS detects a numeric keyboard. It may also be
disabled.
Cache
This category allows you to enable both the internal and the external cache,
enable the internal cache only, or disable both caches. For optimal perfor-
mance, select Both.
System Memory
The System Memory category identifies the size of the base memory. It
cannot be changed.
Extended Memory
The Extended Memory category automatically detects the amount of memory
installed above the amount in the System Memory category. Because the
BIOS automatically calculates the amount of memory installed in your system,
you cannot change this category without adding or removing memory.
4-7
The BIOS Setup Utility
