iii
Micronics Quick Installation
We know many experienced people prefer to read as little of the documenta-
tion as possible. If this sounds like you, here’s the short form:
1.
Ground yourself to prevent damaging static discharge, then remove the
LPX30WB from its packaging.
2.
Check the voltage of your CPU and install a Power Module, if necessary.
See Chapter 2 for information on whether or not you will need a Power
Module.
Warning:
This system board has been factory set to support 5.0V processors. If
using a 3.3V or 4.0V processor, you must install a Power Module
(Appendix E). Failure to install a Power Module could result in
damage to the CPU.
3.
Configure and verify the system board’s jumper settings. (See Jumper
Settings in Chapter 2)
4.
Install the CPU and the system memory. (Chapter 3)
5.
Install the motherboard into the system case and make all of the necessary
case connections.
6.
Install any peripherals (Chapter 3). Do not replace the computer
cover until you have verified the system is working properly.
Summary of Contents for LPX30WB VL-Bus
Page 8: ...viii...
