Micronics Helios Dual Pentium II, Manual, Page: 42 / 90

Helios System Board Manual
40
When the system is turned on, it performs a memory test,
and a BIOS identification and system information screen
is displayed on your monitor, as shown in Figure 4-1.
Figure 4-1: Power-Up Screen
When “Press <F2> to enter Setup” appears at the bottom
of the screen, press the <F2> key to start the Setup
program. Note that the Setup program can only be acti-
vated during the boot sequence.
Running the Setup Procedure
The Helios system board has six primary configuration
screens: Info, Main, Advanced, Chipset, Features and
Exit. To toggle between the screens, press the right arrow
<
→
> and the left arrow <
←
> keys.
Chapter 4: The BIOS Setup Utility