Wireless LAN Access Point Configuration
9
Subnet Mask: 255.255.255.0
OK
to confirm the setting. Your PC will no
6.
Click
w have the IP Address you specified.
1d) Windows NT
1.
Click the
Start
button and select
Settings
, then click
Control Panel
. The
Control Panel
window will
window.
ck
stall it now. If
TCP/IP
is installed, go to
step 5
.
D to complete the installation.
the IP Address and Subnet Mask as
following example.
lable,
92.168.2.1
)
•
DN
•
k.
7.
Click
O
will now have the IP Address you specified.
2.
Ente
configuration tool.
assword.
e and password is as follows.
r name and password, then press
OK
button directly.
appear.
2.
Double-click
Network
icon. The
Network
window will appear. Select the
Protocol
tab from the
Network
3.
Check if the
TCP/IP Protocol
is on your list of
Network Protocols
. If
TCP/IP
is not installed, cli
the
Add
button to in
4.
In the Select
Network Protocol
window, select the
TCP/IP Protocol
and click the
Ok
button to
start installing the
TCP/IP protocol
. You may need your Windows C
5.
After you install
TCP/IP
, go back to the
Network
window. Select
TCP/IP
from the list of
Network
Protocols
and then click the
Properties
button.
6.
Check each of the tabs and verify the following settings:
•
IP Address:
Select
Specify an IP address.
Specify
9
IP Address: 192.168.2.3 (any IP address within 192.168.2.2~192.168.2.254 is avai
do not setup 1
9
Subnet Mask: 255.255.255.0
S:
Let all fields are blank.
WINS:
Let all fields are blank.
•
Routing:
Let all fields are blan
K
to confirm the setting. Your PC
r
192.168.2.1
from Web Browser to get into the Access Point’s
3.
A screen will be popped up and request you to enter user name and p
The default user nam
User Name: Admin
Password: 1234
Enter the default use
9
