After clicking on the Configuration Utility icon, the
Status
screen will display the settings for the PCI Card:
SSID:
The Service Set Identifier is the name assigned to the wireless network.
The factory SSID setting is
default
.
BSSID:
The PCI card hardware MAC address
Network Type:
The Network Type have three mode
(Please see the
Getting Option
section in this manual for an explanation of these three modes.)
Frequency:
802.11g indicates that the PCI card is communicating in the 2.4GHz band.
Data Encryption:
You can see if WEP (Wired Equivalent Privacy) is
Enabled
or
Disabled
here.
Speed:
This is display wireless and wireless connecting Speed.
Authentication State:
This is display Authentication State, it’s to provide N/A and Connected two state.
Signal Strength:
A colored bar shows the intensity of the radio signals in the network
24