8
z
Jumbo Packet:
Select Jumbo Packet for 9K, 12K or disable Jumbo Packet.
3.4 Port Status
Ports Configuration is applied to change the setting of each port.
After pressing enter on the
port status
on the main menu, the screen will show as below:
The
[Port Config]
menu includes:
z
Admin:
Enable a port (On) or disable a port(Off).
z
Port speed and duplex mode setting:
The modes for each port are: Auto, 1000Mbps Full duplex, 100 Mbps Full/Half duplex, 10
Mbps Full/Half duplex mode.
Note:
If user configures it as a specific speed and duplex mode please make sure the other
port that the switch communicate with is also on the same speed and duplex mode.
The following table summarized the function the media supports.
Communication Mode
Description
Auto Auto-Negotiation
1000full
1000Mbps at full duplex mode
100full
100Mbps at full duplex mode
100half
100Mbps at half duplex mode
10full
10Mbps at full duplex mode
10half
10Mbps at half duplex mode
z
Flow control:
