13
5. Console Program
The switch has an RS-232 console port for direct console management
Pin Description
1 DCD (Data Carrier Detect)
2 RX
(Receive)
3 TX
(Transmit)
4 DTR (Data Terminal Ready)
5 GND
(Ground)
6 DSR (Data Set Ready)
7 RTS (Request To Send)
8 CTS (Clear To Send)
9 N/A
(RS-232 DB-9, DCE/female connector)
When connecting a terminal directly to the switch, use a serial RS232
(straight through) cable.
Main Menu:
After power on, the Switch will run the Power-On-Self-Test (POST) with the
screen as following. There are five main functions listed in the [Main Menu]
screen. Each function could be activated by key-in the number (1-5) of item
without pressing [Enter] key.
5 1
9 6
