Introduction
The Micronet SP6510P8 is an 8-port 10/100/1000Mbps switch that
can support two SFP uplinks to other Ethernet switches. This
10/100/1000Mbps managed switch provides 100W PoE output and
offers high performance with a full set of Layer 2 network
management features at an affordable cost. It is suitable for high-
performance workgroups and server applications or can provide a
backbone for a growing business network.
Package Contents
Before you start installing the device, verify the following items are
in the package:
SP6510P8 Managed PoE Switch
Quick Installation Guide
Manual CD
Mounting accessory
Power cord
4
3
1
2
Key Features
Provide 8 IEEE 802.3af PoE ports (or 2 IEEE 802.3at PoE ports)
and power supplying up 100 Watts
Support Port-Based VLANs, Voice VLAN, and Private
VLAN feature
Support Link Aggregation (IEEE 802.3ad) and
QoS (IEEE 802.1p) features
Support IGMP Snooping and immediate leave features
Support IEEE 802.1x port-based and MAC-based security
Support Spanning Tree Protocol (IEEE 802.1D),
and RSTP(IEEE 802.1w) features
Support rate limiting and jumbo frame features
Support HTTPS, SSL and SSH security features
Support DHCP Snooping, Client, and LLDP features
Support SNMP v1/v2c/v3 and RMON (group 1, 2, 3, 9) features
Allow Web and Telnet, SSH access management
Physical Description
Front Panel
Rear View
Hardware Installation
Connecting to an Ethernet Port for Switch Web Management
1.Connect one end of an RJ-45 cable to the Ethernet port on the
front panel and the other end to a PC or terminal for web
interface management.
2.Connect one end of an RJ-45 cable to the Ethernet port on the
front panel and the other end to network devices such as
Cabling Requirements for 1000Base-SX/LX SFP Module
Gigabit Fiber with multimode LC SFP module
Gigabit Fiber with single-mode LC SFP module
Gigabit Fiber with Bi-Di LC 1310nm SFP module
Gigabit Fiber with Bi-Di LC 1550nm SFP module
For more details, please refer to the user manual.
1.
1.
1.
1.
1.
IP cameras, IP phones etc. Make sure the switch port's link LED
lights up.
The SP6510P8 supports more complex and comprehensive cabling
using fiber media. There are two categories of fiber, multimode and
single mode. The latter is categorized into several classes by the
supported distance; they are SX, LX, LHX, XD, and ZX. From the
viewpoint of connector type, there are LC and Bi-Di LC.
POWER
LINK/ACT
10/100M
LINK/ACT
1000M
PoE
DIAG
Green
Amber
Green
Amber
Amber
The LED lights up to indicate the system
is powered up.
The LED lights up to indicate a valid
connection on the port. Otherwise, the
LED is off to indicate no link on the port.
When the LED blinks, it indicates the port
is active and transmitting data.
The LED lights up to indicate a valid
connection on the port. Otherwise, the
LED is off to indicate no link on the port.
When the LED blinks, it indicates the port
is active and transmitting data.
The LED only lights up when the
corresponding port is supplying power.
Flashes amber when the switch is
power cycled.
