MicroNet SP3366, User Manual

Page: 43 / 75

Parameter Description
Rule Name
Users-define description to identify this entry or click “Select”
drop-down menu to select existing predefined rules. The
maximum name length is 32 characters.
Time Schedule
It is self-defined time period. Users may specify a time
schedule for the prioritization policy. For setup and detail,
refer to Time Schedule section.
Source IP Address(es)
/ Destination IP
Address(es)
This is the Address-Filter used to allow or block traffic to/from
particular IP address. Selecting the Subnet Mask of the IP
address range to allow/block the traffic to or form. Set IP
address and Subnet Mask to 0.0.0.0 to inactivate the
Address-Filter rule.
Source Port
This Port or Port Ranges defines the port allowed to be used
by the Remote/WAN to connect to the application. It is
recommended that this option be configured by an advanced
user.
Default: 0 ~ 65535.
Destination Port
This is the Port or Port Ranges that defines the application.
Type
It is the packet protocol type used by the application. Select
TCP, UDP or both TCP/UDP.
Protocol Number Insert the port number.
Inbound / Outbound
Select ‘Allow’ or ‘Block’ the access to the Internet
(“Outbound”) or from the Internet (“Inbound”).
Click <Add> button to apply changes.
40