3
Hardware Installation
Please follow steps below to setup the hardware:
Step 1:
Make sure that all computers are connected to the KVM
Switch with the provided KVM cable and their peripherals are in
power-off state.
Step 2:
Connect the shared PS/2 keyboard, mouse and VGA
monitor to the KVM switch.
Step 3:
Connect the shared speaker set and microphone to the
KVM switch (SP212E/ SP214E only).
Step 4:
Connect PC’s audio and microphone interface to KVM
switch using the Audio cable.
Step 5:
Power on all PCs, KVM will now automatically initiate and
recognize mouse and keyboard.
Push Button Control
The Push Button is located on the top of the device for users to
switch between PCs. On default, PC port and Audio/Mic port are
bound together. Meaning when switching between PC ports,
Audio/Mic will also be changed. For more information on binding and
unbinding of Audio/Mic, please refer to Hotkey Control.
Summary of Contents for SP212E
Page 6: ...Hotkey Command ...
