Rev. 6.2
Micronet SmarTab 8 – Hardware Guide
54 / 61
Electrical Installation
Vehicle Battery Connection
The Micronet SmarTab 8 input power connects directly to the vehicle’s battery. See the Electrical
Installation in Figure 17 below.
The supported nominal battery voltage supply is 12V or 24V DC, with an operating range between 8V to
30V DC.
Figure 17: Electrical Installation Scheme Electrical Installation Procedure
1.
Prepare the wiring for power, ground, and ignition switch in the vehicle for connecting to the
Micronet SmarTab 8 cradle cable.
2.
The power signal connects to the vehicle's power line protected by a 10A fuse. Add an inline 3A
"Slow Blow" fuse with a fuse holder for HHC/HHD blade-type fuses to the power cable.
3.
The ground signal connects to the vehicle's ground line.
4.
The ignition input signal connects to the vehicle's ignition switch line.
5.
Fix the cable after verifying that all the functions are performing correctly.
6.
Arrange the cables using a plastic strip.
