Quick setup
1. Download the MicroNature APP through scanning following mat-
rix code or searching in your APP store;
2. Add the MindAI master device
①
Put the master device on the base after connecting the base with power with
USB cable. Then, waiting for the master device enters the [network configuration]
interface;
②
Enter home page of the MicroNature APP, and opening the [device managem-
ent] page from the sidebar;
③
To adding the master device, click the upper right corner of current page, then
finishing the rest process according to the MicroNature APP's hints;
④
You can find the master device added just now at the [master device manage-
ment] page after the success of the installation;
3. Add the MindAI slave device
①
Click on the master device at the [master device management] page and wait
to enter the [slave device management] page. To adding the slave device, click the
upper right corner of current page, and wait to enter [mode matching] page according
to the APP's hints;
②
Click the learning mode button, then select the brand of air-conditioning
controlled by the slave device, then enter the [learning mode] page;
③
Click the begin learning button. When the slave device's blue indicator lamp is
on, put the remote control launch of air-conditioning to approach the slave device as
close as possible and press the on/off button with the remote control launch pointing
to the blue indicator lamp of the slave device. Then removing the remote control
launch until the slave device's indicator lamp is out. The [model selection] page will
be opened when this learning process is success;
④
Put the slave device to approach the corresponding air-conditioning as close as
possible(less then 3 meters), click the testing button in current page of APP. The slave
device will send control signals to the corresponding air-conditioning for testing of
control. If the air-conditioning is automatically turned on, the setting of temperature is
30 Celsius degree and the setting of mode is cooling, then the lave device has
controlled the air-conditioning successively. Besides, the [with response] button after
the corresponding model of the air-conditioning is on. Click this button to finish the
installation of the slave device;
⑤
You can find the slave device added just now at the [my space] page after the
Summary of Contents for MindAI
Page 1: ...Manual...
