HAL1820, HAL24xy, HAL28xy, HAL36xy, HAL38xy
APPLICATION NOTE
Application Board HAL-APB V1.x
10
Oct. 8, 2012; APN000055_003EN
Micronas
3. Board Configuration
3.1.
Jumper Settings
For changing between LIN-Bus and Biphase-M communication, jumpers need to be set
differently. For non-housed (optional) application boards it may be necessary to switch
jumper for USB/RS-232 connection. The following pictures show how to set the jump-
ers correctly.
Fig. 3–1:
Jumper settings HAL-APB V1.x
The default jumper position Pos1 is indicated by black bars in
Note:
For board versions higher than v1.3, no manual adjustment is required. The
HAL-APB firmware automatically detects the appropriate protocol to be used for
the Hall sensor.
X4 - RS232
(SUB-D-9)
USB
(B)
X3
X2
+18 VDC
CDC320
7G
JP1
JP4
HAL1
HAL1/2
Reset
TP
7
TP8
JP7
JP
5
JP6
HAL-APB
Version 1.3
SW
JP3
Status LEDs on housing
Status LEDs
RJ-45
X4 - RS232
(SUB-D-9)
USB
(B)
X3
X2
+18 VDC
CDC3
207G
JP1
HAL1
HAL1/2
Reset
TP
7
TP
8
HAL-APB
Version 1.5
SW
JP3
Status LEDs on housing
Status LEDs
RJ-45
JP2
JP5
JP4
