Micron T 1289 Operating Instructions Download Page 4

Micron® 300W Hot Air SMD Handheld Rework Tool

Distributed by Altronic Distributors Pty. Ltd.

 • Perth • Sydney • Melbourne

Phone: 1300 780 999 Fax: 1300 790 999

altronics.com.au

Altronic Distributors warrants this product for one year from date of purchase from Altronics or its resellers 
to the consumer. If this item is part of an installation or another product, please contact the installer or 
supplier for your warranty.

During the warranty period, we undertake to repair or replace your product at no charge if found to be 
defective due to a manufacturing fault. The warranty excludes damage by misuse or incorrect installation 
(i.e. failure to install and operate device according to specifications in the supplied instruction manual), 
neglect, shipping accident, or no fault found, nor by use in a way or manner not intended by the supplier.

For repair or service please contact your 

PLACE OF PURCHASE.

 

If this item was purchased directly from Altronics please make a warranty claim by: 

1. FOR MAIL ORDER CUSTOMERS (includes school and trade orders),

a) Ringing us on 1300 797 007 and quoting your tax invoice number.
b) Upon contacting Altronics, we will issue an R.A. (Return Authorisation). As Altronics have a

number of service agents throughout Australia, a copy of the R.A. will be emailed, faxed or mailed 
to you with full instructions of how and where to send the goods. The freight for shipping goods 
back to Altronics for all repairs is at the customer’s expense.

c) A copy of the R.A. form must accompany the goods to effect the repair.
d) Altronics will pay the return freight to the customer where the warranty claim has been accepted.
e) Please quote the R.A. number in any correspondence to us.

2. FOR OVER THE COUNTER PURCHASES; to make a warranty claim, please return the goods 
to us in any of our stores, with a copy of your proof of purchase (tax invoice).

a) Upon leaving the goods at one of our stores, an R.A. number will be issued to you.
b) Once repaired, you will be contacted, advising that the goods are ready to be collected 

from the store.

It is at Altronics discretion as to whether the goods will be repaired or replaced (whilst under 
warranty); and as to whether identical goods will be used to replace the item due to changes of 
models / products.

Note: Under no circumstances should you attempt to repair the device yourself or via a non- 

authorised Altronics service centre, as this will invalidate the warranty!

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You 
are entitled to a replacement or refund for a major failure and for compensation for any other reasonably 
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail 
to be of acceptable quality and the failure does not amount to a major failure.

Summary of Contents for T 1289

Page 1: ...Air Handheld Rework Tool Operating Instructions T 1289 This 300W SMD Hot Air SMD Handheld Rework tool provides a quick and easy way to rework boards fitted with surface mount parts including RoHS certified products ...

Page 2: ... the hot air gun on the bracket 4 Place the nozzle on the IC pins so that the hot air can melt the solder on the IC pins then use the tweezers to remove the IC 5 After use switch rework tool off unplug from mains and allow it to cool before storing in a safe place out of children s reach 1 Indicates the setting temperature Press the button or to adjust the temperature 2 Air flow speed indicator ea...

Page 3: ...ure has dropped to a safe level power will automatically turn on 3 Caution High Temperature operation Do not use the SMD unit near gases paper or other inflam mable materials The hot air is extremely hot and can cause painful burns Never touch the heater pipe or allow the heated air to blow against your skin 4 Do not disassemble the product 5 Unplug the unit when not in use WARNING Warning this to...

Page 4: ...o you with full instructions of how and where to send the goods The freight for shipping goods back to Altronics for all repairs is at the customer s expense c A copy of the R A form must accompany the goods to effect the repair d Altronics will pay the return freight to the customer where the warranty claim has been accepted e Please quote the R A number in any correspondence to us 2 FOR OVER THE...

Reviews: