5
Micron® 1300W Hot Air SMD Rework Station
1
2
3
4
5
6
7
8
9
Figure 1: Boot Screen
Touchscreen
Figure 2: Unit in standby
with handle in cradle
No.
FUNCTION
DESCRIPTION
1
Heating (Sun Icon)
Sunlight icon shows that the element is heating up, temperature
increases. When it flashes, it shows that the temperature is being
maintained at the set temperature.
2
Cooling (Snowflake)
When it appears on screen, it shows that they element is cooling
down, decreasing temperature. The fan may be whirring rapidly.
3
Standby (Moon Icon)
When it appears on screen it shows that the element is in stand-
by / sleep mode, and the Hot Air nozzle is possibly at or near
room temperature. CAUTION – metal parts of blower might be
still hot!
4
Air Flow Reading
Use the arrow buttons under ‘AIR’ to set the rate of airflow from
0 to 2000cm3/sec (120L/MIN).
5
Channel Preset
CH1, CH2, CH3 preset temperature setting accessed by press-
ing the green button on the hand tool. CH0 is default operating
mode.
6
Adjust Temperature
Press Up arrow to increase set temperature, down arrow
to decrease.
7
Display Temperature
As set by user using arrows.
8
‘Cal’ - Correction Value Used to calibrate the heating element. The ‘CAL’ function is ac-
cessed by pressing SET on the LCD touchscreen with the green
button on the handle. CAL requires a soldering iron thermometer
and is not recommended.
9
Set & Enter
Press SET to activate Channel presets, and activate Cal function.
Press ENTER to confirm the temperature and airflow once set for
a channel.
10
Channel Preset Select
Press the green button on the blower handle to select which CH
you wish to use or adjust. Scrolls through Channels CH1 – CH3
in a loop.
NOTE: From any preset CH setting, just tap the adjust temperature arrows and the CH0 default
activates. It remains the default channel for temperature control, unless a channel preset is again
activated by pressing the green button on the handle
.
1.
Heating
2.
Cooling
3.
Standby
4.
Air Flow
5.
Preset Channel
6.
Adjust Temperature
7.
Display Temperature
8.
Cal- Correction Value
9.
Set & Enter or control Air flow rate