Digital Menu Board 4249 Wall Mount Installation Manual
Page 7
Rev. 04/19
Step 2A – Joining 2W & 3W Mounts to make 4W or > (For 42” & 43”)
Mount Type
Instructions Diagrams
For configurations
requiring 4W or 6W.
•
Join a 2W+2W menu
board mount by using
Joiner Bars removed
from Joiner Rail
Assemblies provided
(Part JRS). See fig.2A.
•
Place Joiner Bars as
shown in fig. 2B.
•
Tighten screws using
4mm hex wrench once
they are in place. See
fig. 2C and 2D.
Fig. 2A
Fig. 2B
Fig. 2C Fig. 2D
For configurations
requiring 5W.
•
Join a 2W+3W menu
board mount by using
Joiner Bars removed
from Joiner Rail
Assemblies provided
(Part JRS). See fig.2A.
•
Place Joiner Bars as
shown in fig. 2E.
•
Tighten screws using
4mm hex wrench once
they are in place. See
fig. 2C, and 2D.
Fig. 2E
For configurations
requiring 6W.
•
Join a 3W+3W menu
board mount by using
Joiner Bars removed
from Joiner Rail
Assemblies provided
(Part JRS). See fig.2A.
•
Place Joiner Bars as
shown in fig. 2F.
•
Tighten screws using
4mm hex wrench once
they are in place. See
fig. 2C, and 2D.
Fig. 2F
