Micron 700 Series, Manual

Page: 12 / 44

Control Panel
Page
12
file:
tx700ins2master.doc
Audio Input Socket
A 6 pin Lemo connector with gold plated pins. The microphone-input cable is connected by a push-pull action. The
transmitter offers many audio input options depending on the pin configuration selected. The variations in pin
selection is detailed under 'Transmitter cable connection data'.
Set Level Control: A screwdriver operated audio gain control, used to set the modulation level.
Modulation Level and Battery Status Indicators
The 2 light emitting diodes (LED's) act as a simple volume indicator. The ‘-10’ light also doubles up as a battery
status indicator.
Bass - Cut Switch
The Bass – Cut switch provides added front-end protection, where it may be used to reduce wind noise and
counteract close microphone effects.
Antenna Socket: A SMA 50 Ohm coaxial socket. The antenna can be connected by a screw-on action.