Micromeritics Gemini VII 2390a, Operator'S Manual

Page: 40 / 426

Specifying Sample Defaults Gemini VII
3-4 239-42828-01 - Dec 2012
Basic Format
When specifying defaults in the Basic format, select from existing default parameters. The defaults
established in Basic format also serve as defaults for files created using the Restricted format.
To define parameter files before entering sample defaults in Basic format, refer to
Defining Sample
Information Files
, page
3-6
.
Perform the following steps to establish defaults for a sample information file in the Basic format.
1. To change to Basic format, go to
Options > Option Presentation > Basic
.
2. Go to
Options > Sample Defaults
.
3. In the
Sequence Number
alpha/numeric text box, specify a default file name string. The
Sequence Number
field must contain a minimum of three (3) numbers. This number is
incrementally sequenced and displays in the
File name
text box in the
File > Open > Sample
Information
window.
4. The text box to the right of the
Sample
field, is used to enter a format for the sample
identification. Include the
$
symbol to automatically include the
Sequence Number
field text as
part of the sample identification.
5. In the
Mass
group box, enter default values for the sample’s mass and density. Both of these
values may be edited at the time of analysis. Refer to
Sample Information Files
, page
5-8
.
The field label for the Sample field can be modified by overwriting the default field label.