Micromeritics Gemini VII 2390a, Operator'S Manual

Page: 197 / 426

Gemini VII Regression Report
239-42828-01 - Dec 2012 7-5
Regression Report
Reports > Regression Report
Use to generate an SPC (Statistical Process Control) Regression report to determine the interdepen-
dency between two variables. Up to three dependent variables (Y-axis) may be plotted against a single
independent variable (X-axis). The degree of correlation between the variables is also reported.
Field or Button Description
Show report title checkbox
and text box
Select and enter a report title to appear on the report header.
Show graphic

checkbox and text box
Select to show a graphic on the report header. Click the
Browse
button
to locate the graphic in either .BMP or .EMF format.
•
Height / Width -
enter the height and width of the selected graphic.
These values determine the graphic appearance on the generated
report.
X- and Y-Axis

Variable

dropdown lists
Use to designate the X- and Y-axes variables. The variables in the
dropdown lists are those selected in the
Reports > SPC Report Options
window. Use these options to plot the regression of up to three Y-axis
variables against the X-axis variable.
Axis Range

text boxes
Enter the beginning and ending values for the X- and Y-axis ranges.
These fields are disabled if
Autoscale
is selected.
Autoscale checkboxes
When enabled, allows the X- and Y-axes to be scaled automatically.