Micromeritics ASAP 2460, Operator'S Manual

Page: 126 / 468

Report Options Files ASAP 2460 Operator’s Manual
3-32 246-42800-01 - Aug 2013
Overlays
button Refer to
Multiple Sample Overlays
, page
2-53
.
Import
button Use to import up to 25 pore distribution data files. These datasets are
shown only in BJH and Dollimore-Heal reports.
Apply thermal
transpiration
correction
checkbox
Use to correct the temperature-induced pressure difference between the
manifold and the chilled sample tube. This option is most significant for
pressures less than approximately 1.0 mmHg. Do not use filler rods in the
sample tube when applying correction for thermal transpiration.
Always use thermal transpiration when performing micropore analyses.
Refer to
CALCULATIONS
, page
C-1
for additional information on
thermal transpiration.
•
Inside diameter of sample tube text box
- Enabled when
Apply
thermal transpiration correction
is selected. Enter the inside
diameter of the sample tube used in the analysis.
Selected Reports
list
box
Select the checkbox to the left of the report names to include in the report.
For BJH reports, BJH pore dimension can be calculated in pore width (w),
pore radius (R) or pore diameter (D). Go to
Options > Units
to specify
default calculations.
Browse
button
Cancel
button
Close
button
Edit
button
OK
button
Preview
button
Save
button
Refer to
Common Fields and Buttons - File Menu Options
, page
3-1
.
Field or Button Description (continued)