MICROMATIC A010240 Installation, Service, And Use Manual Download Page 4

Micromatic LLC                                                                                                                                                           

 

RotacTippers.com

 

525 Berne St 
Berne, IN 46711 
1-260-589-2136 x3211 

[email protected]

   

                             

Page 

4

 of 

10

 

26-18-1006 rev.- 

                                                 Model: LONG ARM

 

 

  THERE  ARE  NO  OTHER  WARRANTIES  THAT  EXTEND  BEYOND  THE 

WARRANTY HEREIN CONTAINED and no statement, oral or written, inconsistent 
with this warranty is binding on the Seller. No agent, employee, or representative 
of  the  Seller  has  any  authority  to  bind  the  Seller  to  any  confirmation, 
representation,  or  warranty  concerning  the  equipment  that  is  the  subject  of  this 
document beyond that specifically included in the written quotation. Extension of, 
or amendment to, this warranty can be made only in writing by a duly authorized 
officer of the Seller. 

  This warranty is made IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR 

IMPLIED,  including  any  warranty  of  MERCHANTABILITY  or  FITNESS  FOR  A 
PARTICULAR PURPOSE. 

 

Seller’s remedy for breach of any warranty shall be limited as defined below. 
 

o

  Seller  agrees  to  repair  or  replace,  without  cost,  any  part  of  the  product 

manufactured by the Seller that, for the warranty period as specified above, 
may  prove,  upon  Seller’s  inspection,  to  be  defective  in  material  or 
workmanship and not commercially acceptable. 

o

  Seller  shall  have  the  option  to  inspect  any  parts  claimed  to  be  defective 

either  at  Seller’s  place  of  business  or  Buyer’s  place  of  manufacture.  No 
return shall be accepted unless Seller has had an opportunity to inspect the 
product or has expressly authorized the return. 

o

  Under no circumstances shall Seller be liable for consequential or incidental 

damages  resulting  from  any  breach  of  warranty  even  though  Seller  may 
have  been  advised  of  the  possibility  of  such  damages,  nor  will  Seller’s 
liability for breach of any warranty exceed the purchase price of the product 
less the value of the equipment at time of acceptance. 

o

 

Any claim for breach of Seller’s warranty herein contained must be made in 
writing,  addressed to the Seller, and set forth in sufficient detail to permit 
identification of the defect. Any claim for breach of warranty must be made 
within twenty-four (24) months after breach of warranty. If not made within 
said twenty-four (24) month period, it shall be conclusively deemed to have 
been waived. 

o

  The remedies for breach of warranty herein contained shall be exclusive. 

 

 

 

Summary of Contents for A010240











Reviews: