Microlife FR1MF1 Instruction Manual Download Page 12

8

FR1MF1

EN

beep will verify the completion of measurement.

2. Read the recorded temperature from the LCD display. 
             NOTE

•  

Patients and thermometer should stay in similar room 
conditions for at least 30 minutes.

•  Don’t take a measurement while or immediately after nursing a 

baby.

•   Don’t use the thermometer in high humidity environments.

   

Patients should not drink, eat, or exercise before/while taking  

    the measurement

•  Don’t move the measurement device from the measuring area

    before hearing the termination beep.

  

10 short beeps and a red LCD backlight alerts the patient that 
he/she may have a temperature equal to or higher than 37.5 
°C.

•  Always  take the temperature  in the same location,  since 

    temperature readings may vary according to location.

 

 Doctors recommend rectal measurement for newborn infants 

    within the first 6 months, as all other measuring methods might 

lead to ambiguous results.If using a non contact thermometer  

    on those infants,we always recommend verifying the readings   
    with a rectal measurement.

  

In the following situations it is recommended that three  
temperatures are taken with the highest one taken as the     
reading

1. Children under three years of age with a compromised 

       immune system and for whom the presence or absence of  
         fever is ritical

2. When the user is learning how to use the thermometer for 

       the first time until he/she has familiarized himself/herself 
         with the instrument and obtains consistent reading .

3. If the measurement is surprisingly low.

  

Readings from different measuring sites should not be 

   compared as the normal body temperature varies by 

Summary of Contents for FR1MF1



















Reviews: