Microlife BP3GT1-6X, Instruction Manual

Page: 10 / 55

4.5. Using the AC power adapter
You may also operate this monitor using the included AC
adapter. Use only the included AC adapter to avoid
damaging the unit.
a) Ensure that the AC adapter and cable are not damaged.
b) Plug the adapter cable into the AC adapter port on the
right side of monitor.
c) Plug the AC adapter into a 110 V power socket (U.S. or
Canada).
d) Test that power is available by switching the screen lock
located on the right side of the monitor off and on. The
screen display will be visible if the power is available.
Note:
• No power is taken from the batteries while the AC
adapter is connected to the instrument.
• If the power is interrupted during a measurement (e.g., by
removal of the adapter from the wall socket), the
instrument must be reset by removing the plug from the
instrument.
If you have any questions regarding the AC adapter, call
Blood Pressure Support at 1-800-568-4147.
4.6. Cuff tube connection
Insert the cuff tube into the opening on the left side of the
instrument.
Note: This unit will only work accurately with the included
cuff.
9