Microlife BP 3AX1, Instruction Manual

Page: 17 / 52

6.3. Clearing the Memory
This item enables you to clear readings for user 1 or user 2.
You can erase single readings, or erase all readings at once.
Select user 1 or user 2 as explained under 6.2. Scroll to Clear
Memory and press
OK . The user you selected is shown in the
upper left corner.
Clear Single Readings
Select «SINGLE» by the selection buttons and press OK to erase
single readings. Press
▲
or
▼
to select a reading from the list.
An arrow
†
highlights the selected reading. Press OK to erase
the selected reading.
Clear All Readings
Select «All» by the selection buttons and press OK to erase all
readings of the selected user. You are prompted to confirm the
action. Press
OK to erase all readings of the selected user. Press
the 0/I button to cancel deletion of all readings.
7. Adjusting the Display Contrast
This item enables you to adjust the contrast.
Scroll to Contrast and press
OK
to enter the submenu.
Press
▲
to increase the display contrast. Press
▼
to decrease
the display contrast. After you have adjusted the contrast, press
OK to confirm the setting.
15
ALL SINGLE
[
▼
]
[
▲
]
CLEAR MEMORY
CLEAR MEMORY
3/03 15:48
No. SYS DIA PUL
1 124 84 76
2 139 95 74
3 139 98 80
4 146 106 72
CLEAR MEMORY
CLEAR ALL?
YES=[M]
NO=[O/I]
CONTRAST
[
▼
] [
▲
]