15
Troubleshooting
During usage there is little that can go wrong with your new system. The following
items are easy to troubleshoot:
Water is not flowing from the outlet, or is flowing at low flow rates:
• Inlet pressure too low
+ Inlet pressure must be above 200kPa
• Cartridge blocked fully or partially
+ Replace cartridge with new
+ Consider pre-filters – consult your Microlene dealer
• Cartridge not installed correctly
+ Remove and reinstall cartridge
• Pipework not installed correctly
+ Review direction of flow on all valves and fittings to ensure they are
installed in the correct direction
Water leaking:
• Pipework not correctly assembled
+ Review and/or reinstall pipework as required
• Cartridge not installed correctly
+ Check sealing ring
+ Check cartridge is tightened into mounting bracket/connection head
correctly
If you are experiencing other issues contact your Microlene dealer for further advice.
