1
English
2
FrequentlyAsked Questions (FAQ)
FrequentlyAsked Questions
Answers
Check if the system is powered on or battery is
replaced with fresh BL-5C type
Please perform an initial charge of 4 hours prior
to initial use.
Check if the audio source is properly paired and
connected. Secondly check if the 3.5mm stereo plug
is correctly inserted for AUX mode.
Ensure volume is correctly set
What are the products
supported?
Where to place this speaker
If the problem still exists, please contact the distributor or ask for professional service
Check if the volume is at lower level and the Mp3
format is recorded at above 196 bitrate
Please check the audio source distance, try to place
it nearer to the speaker system.
Intermittent sound
LED do not light up
No Sound
Sound is distorted
It is magnetically shielded so can be placed
near LCD TV Monitor without any distortion
Any Bluetooth enabled music devices and playback
devices such as PC, Media players with 3.5mm
stereo plug.
How to charge the system?
Simply connect the system to the supplied Charging
adapter. After charged the LED will turned off.
EN
6
Technical Information
© 2012 Microlab Electronics Co., Ltd All rights reserved.
- The end -
AMPLIFIER
Total Power:
4 Watt RMS
Power distribution:
1.25 Watt x 2 + 1.5 Watt
Harmonic distortion:
< 5% 1 W 1 kHz
Frequency response:
40 Hz - 18 kHz
Signal/Noise ratio:
> 65 dB
Separation:
> 45 dB
Speakers
Tweeter type:
2” x 2
Tweeter rated power:
2 Watt 4 Ohm
Woofer type:
3”
Woofer rated power:
5 Watt 2 Ohm
Interfaces
Output:
NIL
Input:
3.5mm stereo jack, mini-USB charging port
Wireless:
Bluetooth 2.1 + EDR, and A2DP
80-MD312-97-0001-01 2012-04-09 (changed to power adapter)
