1
English
2
Technical Information
AMPLIFIER
Total Power:
65 Watt RMS
Power distribution:
8 Watt x 5 + 25 Watt
Harmonic distortion:
< 0.3 % 1 W 1 kHz
Frequency response:
30 Hz - 20 kHz
Signal/Noise ratio:
> 75 dB
Separation:
> 45 dB
Speakers
Tweeter type:
1 x 4 (Satellites)
Tweeter rated power:
5 Watt x 4, 8 Ohm
Mid-range type:
3 x 4 (Satellites),
3" x 2 (Center)
Mid-range rated power:
10 Watt x 4, 4 Ohm (Satellites),
10 Watt x 2, 8 Ohm (Center)
Woofer type:
6.5
Woofer rated power:
30 Watt, 8 Ohm
Interfaces
Output:
5RCAs
Input:
5.1 - 6RCA (home theater), 2.1 - 2RCA (stereo), 1 x Coaxial, 1 x TOSlink
Wireless:
RF remote control (Battery type: Alkaline AAA)
Frequently Asked Questions (FAQ)
Frequently Asked Questions Answers
Please ensure fresh batteries are inside the
battery compartment of the remote control.
Try to use it nearer to the subwoofer.
Check of the audio source is working well.
Check if the audio and speaker cables are well connected.
Ensure volume is correctly adjusted
What are the products
supported?
Where to place this speaker
If the problem still exists, please contact the distributor or ask for professional service
Check if the volume is at lower level and the Mp3
format is recorded at above 196 bitrate
Check the 3.5 mm stereo cable for proper connection
and cable is firmly inserted
Intermittent sound
Wireless volume intermittent
Infrared remote control
No Sound
Sound is distorted
It is magnetically shielded so can be placed
near LCD TV Monitor without any distortion
© 2012 Microlab Electronics Co., Ltd All rights reserved.
- The end -
EN
6
Any playback devices such as PC, notebook with USB slot,
CD/DVD player, Media Players with 3.5mm stereo plug.
Static sound heard when volume
knob is turned
Turn off the playback source first, then turn the speaker
volume knob several times. Playback again and monitor.
80-M1910-97-0001-01 2012-05-09 (Change remote control and front panel)