Operation
Master/Slave Build-In Function
Connect the lights in series, the first light control the other light to auto
show, sound control show and so on. It’s very good for the instant show mod. Must set
the first light to be master light
same time to choose
(Random show),
(show 1) or...
(show 8). If there are no DMX signals, the master mode
LED will light up, the sound control LED will strobe according to the music, the other
lights will not work in slave mode.
Choose
(Normal) or
(two light
show) mode, when connect the DMX cable, the slave LED will light up.
Two light show
For the slave light, slave 1(
)running same as the master light, slave 2 (
)
running against the master light. If there are just two light, could set the second
light as slave light (
)
for better show.
DMX Controller
If controlled by DMX controller, you need to set the DMX address code to control
the light, the address code value is between 1-512, then the light will receive the
signal accordingly.
Press
MENU
button, choose
, press
ENTER
button, address code will strobe.
Use
UP /DOWN
to select DMX512 address code. After address code settled, press
ENTER
button until the address code stops strobing, it will automatically return to
the menu after 8 seconds. If you want to go back to the previous status and without
any changes, you could press
MENU
button.
DMX 512
(Choose
default address code)
Channel
Value
Function
CH1
(008-255 all under
sound control)
000-007
No Function
008-037
Show Mode 1
038-067
Show Mode 2
068-097
Show Mode 3
098-127
Show Mode 4
128-157
Show Mode 5
158-187
Show Mode 6
188-217
Show Mode 7
218-247
Show Mode 8
248-255
Random Show 1-8
