n920T 2020 Operating Manual
9
A. Approved Antennas
This radio transmitter (IC:3143A-20N920T) has been approved by
Innovation, Science and Economic Development
Canada
to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not
included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use
with this device.
Part Number
Description
Rubber Ducky
MHS031000
3dBi, 900MHz Rubber Ducky Antenna RPTNC Swivel
MHS031070
3dBi, 900MHz Rubber Ducky Antenna Reverse SMA Swivel
MHS031080
3dBi, 900MHz Rubber Ducky Antenna Reverse SMA Straight
Puck Antennas
MHS035460
4dBi, Puck Antenna 700-960 MHz/1575-2700 MHz Mag Mount
MHS035480
4dBi, Puck Antenna Main and Div 700-960 MHz/1575-2700 MHz Mag Mount
MHS035470
4dBi, Puck Antenna Main and Div 700-960 MHz/1575-2700 MHz Permanent Mount
Yagi Antennas
MHS031311
6dBd, 900MHz Yagi Directional Antenna Antenex,
MHS031431
6.5dBd, 900MHz Yagi Directional Antenna Bluewave
MHS031501
9dBd, 900MHz Yagi Directional Antenna Antenex
MHS031441
10dBd, 900 MHz Yagi Directional Antenna Bluewave
MHS031451
11dBd, 900 MHz Yagi Directional Antenna Bluewave
Patch Antennas
MHS031440
8dBi 900 MHz Patch Antenna
Omni Directional
MHS031251
3dBd, 900MHz Omni Directional Antenna Antenex
MHS031461
3dBd, 900 MHz Omni Directional Antenna Bluewave
MHS031471A
8dBi, 900MHz Omni Directional Antenna
WARNING
:
Changes or modifications not expressly approved by Microhard Systems Inc. could void the user’s authority to operate the equipment.
This device has been tested with UFL connectors with the antennas listed in Appendix A When integrated in OEM products, fixed
antennas require installation preventing end-users from replacing them with non-approved antennas. Antennas not listed in the tables
must be tested to comply with FCC Section 15.203 (unique antenna connectors) and Section 15.247 (emissions). Please Contact
Microhard Systems Inc. if you need more information.
Innovation, Science and Economic Development Canada: This device has been designed to operate with the antennas listed above, and
having a maximum gain of 13.15 dBi. Antennas not included in this list or having a gain greater than 13.15 dBi are strictly prohibited
for use with this device. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required
for successful communication. This Class B digital apparatus complies with Canadian ICES-003.
Summary of Contents for n920T 2020
Page 6: ......
