3
The power setting must be no more than the above calculation value.
Any
higher is a violation of FCC rules. See IMPORTANT warning below:
OEMs must take precaution to satisfy the maximum RF exposure and EIRP
maximum limits in accordance with the compliance limits herein.
The conducted power is continuously variable from 0.001 to 1.0 Watt. For
operations in mobile RF exposure conditions, the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 23
cm from all persons with the maximum allowable antenna gains of 1.5 dBi
(Quarter Wave), 2 dBi (Rubber Ducky), 5.15 dBi (Transit), 8.15 dBi (Omni
Directional), 12.5 dBi (Patch) and 14.15 dBi (Yagi). For antennas with the
gains greater 6dBi, the appropriate cable with loss in dB shall be used in
order to maintain the EIRP (conducted powerin dBm + antenna gain in dBi
cable loss in dB) less than 36 dBm. Antenna(s) used for this transmitter
must not be co-located or operating in conjunction with any other antenna
or transmitter.
