Microh Ultra Beam 700 User Manual Download Page 3

Page: 3 / 19

Congratulations on choosing our products! Please carefully read this instruction manual in its
entirety and keep it well for using reference. This manual contained about the installation and the
relative using inform ation of this products. Please according to this manual's relative speaking
when using this equipment.

This equipment was made of new style, high intensity plastic . It fully shows the modem times light
charac teristic with beauty structure. And it was made according to CE standard .Fully up the
international standard of DM X512 agreement. M aster or slave in phase ntrol .Can be use in large
entertainment theater,performing and palying hall etc.

2. Safety instructions

1. Open the box and checking

Every person involved with installation and maintenance of this device have to:
- be qualilfied
- follow the instructions of this manualentertainment theater,performing and palying hall etc.

CAUTION!

Be careful with your operations.

With a high voltage you can suffer

a dangerous electric shock when touching the wires!

This device has left our premises in absolutely perfect condition. In order to maintain this condition
and toen-sure a safe operation, it is absolutely necessary for the user to follow the safety
instructions and warning notes written in this manual.

Important:

The manufacturer will not accept liability for any resulting damages caused by the non-
observance of this manual or any unauthorized modification to the device.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
Never let the power-cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
Make sure that the available voltage is not higher than stated on the rear panel.
Always plug in the power plug least. Make sure that the power-switch is set to off-position before
you co nnections with the mains with particular caution!
Make sure that the power-cord is never crimped or damaged by sharp edges. Check the decice
and the power-cord from time to time.
Always disconnect from the mains, when the device is not in use or before cleaning it.
Only handle the power-cord by the plug. Never pull out the plug by tugging the powercord.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
The electric connection, repairs and servicing must be carried out by a qualified employee.
Do not connect this device to a dimmer pack.
Do not switch the fixture on and off in short intervals as this would reduce the lamp's life. rly mean
that the device is defective.
Do not touch the device's housing bare hands during its operation (housing becomes hot)!
For replacement use lamps and fuses of same type and rating only.