1
TABLE OF CONTENTS
1. INTRODUCTION AND UNPACKING
1
2. SAFTEY INSTRUCTIONS
1-2
3. OPERATION INSTRUCTIONS
2-3
4. MOUNTING AND INSTALLATION
3-4
5. DMX-512 CONTROL CONNECTIONS
4-5
6. MENU NAVIGATION
5-6
7. DMX CHANNELS
6
8. KEY FEATURES
7
9. TECHNICAL SPECIFICATIONS
7
10. MAINTENANCE AND CLEANING
8
1. INTRODUCTION AND UNPACKING
Thank you for purchasing the MICROH TITAN RGB 6W laser system. For your own safety and knowledge, please read this manual
before installing or operating the device. This manual covers the important information on installation and applications. Please install
and operate the fixture according to instructions. Meanwhile, please keep this manual for future reference.
The MICROH LED TITAN RGB 6W laser is made of a new type of high temperature cast aluminum casing. The fixture is designed
and manufactured strictly following CE standards, complying with international standard DMX512 protocol. This fixture is applicable
but not limited to large-scale live performances, theater, studio, nightclubs and discos.
The MICROH TITAN RGB 6W laser system uses 3 coloured laser diodes that are carefully aligned with the internal scan mirrors.
Please carefully unpack it when you receive the fixture and check if it was damaged during the transportation. And please check
whether the following items are included inside the box:
Fixture – One
Power Cord – One
Bracket Set – One
User Manual – One
2. Safety Instructions
This device has left the factory in perfect condition. In order to maintain this condition and to ensure safe operation, it is absolutely
necessary for the user to follow the safety instructions and warning notes written in this user manual.
If the device has been exposed to temperature changes, do not switch it on immediately. The arising condensation could damage
the device. Leave the device switched off until it has reached room temperature, and is dry.
This device falls under protection-class I, therefore it is essential that the device be grounded. The electrical connection must be
carried out by a qualified technician.
The device should only be used with rate voltage and frequency. Make sure that the available voltage is not higher than 120V as
stated at the end of this manual.
