Mounting and Installation
Caution:
For added protection, mount the fixtures in areas outside walking paths,
seating areas, or in areas were the fixture might be reached by unauthorized
personnel. Before mounting the fixture to any surface, make sure that the
installation area can hold a minimum point load of 10 times the device’s weight.
Fixture installation must always be secured with a secondary safety attachment,
such as an appropriate safety cable. Never stand directly below the device when
mounting, removing, or servicing the fixture.
Whether installing inverted on a truss / ceiling or set on a flat level surface (see
illustration below). Be sure this fixture is kept at least 0.5m (1.5 ft.) away from any
flammable materials (decoration etc.). Always use and install the supplied safety
cable as a safety measure to prevent accidental damage and/or injury in the event
the clamp fails.
Mounting Points:
Overhead mounting requires extensive experience, including
calculating working load limits. A knowledge of the installation material being
used and periodic safety inspection of all installation material and the fixture are
all imperative and should only be performed by a qualified technician. Improper
installation can result in bodily injury and damage.
Be sure to complete all rigging and installation procedures before connecting the
main power cord to the appropriate wall outlet.
Clamp Mounting:
The MICROH OMNI HZR provides a unique mounting bracket
assembly that integrates 2 brackets to be used to mount on a truss or the floor.
When mounting this fixture to truss, be sure to secure an appropriately rated clamp
to the included bracket fitted through the center hole. As an added safety measure,
be sure to attach at least one properly rated safety cable to the fixture.
Regardless of the rigging option you choose for your MICROH OMNI HZR, always
be sure to secure your fixture with a safety cable. The fixture provides a built-in
rigging point for a safety cable on the hanging bracket. Be sure to only use the
designated rigging point for the safety cable and never secure a safety cable to a
carrying handle.
