4
4. MOUNTING AND INSTALLATION
Caution:
For added protection, mount the fixtures in areas outside walking paths, seating areas, or in areas were the fixture might
be reached by unauthorized personnel. Before mounting the fixture to any surface, make sure that the installation area can hold a
minimum point load of 10 times the device’s weight. Fixture installation must always be secured with a secondary safety attachment,
such as an appropriate safety cable. Never stand directly below the device when mounting, removing, or servicing the fixture.
Whether installing inverted on a truss or ceiling, or set on a flat level surface (see illustration below). Be sure this fixture is kept at
least 0.5m (1.5 ft) away from any flammable materials (decoration etc.). Always use and install the supplied safety cable as a safety
measure to prevent accidental damage and/or injury in the event the clamp fails.
Mounting Points:
Overhead mounting requires extensive experience, including calculating working load limits. A knowledge of the
installation material being used, and periodic safety inspection of all installation material and the fixture are all imperative and should
only be performed by a qualified technician. Improper installation can result in bodily injury and damage.
Be sure to complete all rigging and installation procedures before connecting the main power cord to the appropriate wall outlet.
Floor Mounting:
Set the 2 brackets at your desired angle and aim your fixture accordingly. Please see diagram below.
Clamp Mounting:
The MICROH LEDPRO64RGBW provides a unique mounting bracket assembly that integrates 2 brackets to be
used to mount on a truss or the floor. When mounting this fixture to truss, be sure to secure an appropriately rated clamp to the
included bracket fitted through the center hole. As an added safety measure, be sure to attach at least one properly rated safety
cable to the fixture.
Regardless of the rigging option you choose for your MICROH LEDPRO64RGBW wash fixture, always be sure to secure your
fixture with a safety cable. The fixture provides a built-in rigging point for a safety cable on the hanging bracket as illustrated above.
Be sure to only use the designated rigging point for the safety cable and never secure a safety cable to a carrying handle.
