Maintenance And Cleaning
The following points have to be considered during the inspection:
1.
All screws for installing the device or parts of the device must be tightly
connected, and must not be corroded.
2.
There must not be any deformations on the housing, colour lenses, fixations
or installation spots (ceiling, suspension, trussing).
3.
Mechanically moved parts must not show any traces of wearing and must not
rotate with unbalances
4.
The electric power supply cables must not show any damage, material
fatigue or sediments.
Further instructions depending on the
CAUTION
Disconnect from mains before starting maintenance operation.
In order to keep the fixture in good condition and extend the life, we suggest
regular cleaning to the fixture.
1.
Clean the inside and outside lens each week to avoid the light output from
darkening due to accumulation of dust, dirt, etc.
2.
Clean the fan each week.
3.
A detailed electrical check by approved technician every three months is
advised. Ensure the circuit contacts are in good condition.
We recommend a frequent cleaning of the device. Please use a moist, lint- free
cloth. Never use alcohol or solvents.
PLEASE NOTE:
All information for this product is subject to change without notice!
