2) There must not be any deformations on the housing, colour lenses, fixations or installation
spots (ceiling, suspension, trussing).
3
)
Mechanically moved parts must not show any traces of wearing and must not rotate with
unbalances.
4
）
The electric power supply cables must not show any damage, material fatigue or sediments.
Further instructions depending on the installation spot and usage must be handled by a skilled
installer or technician. Any safety issues must be resolved.
In order to keep the fixture in good condition and extend the life, we suggest regular cleaning to
the fixture.
1) Clean the inside and outside lens each week to avoid the light output from darkening due to
accumulation of dust, dirt, etc.
2) Clean the fan each week.
3) A detailed electrical check by approved technician every three months is advised. Ensure the
circuit contacts are in good condition.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use
alcohol or solvents.
There are no serviceable parts inside the device. Please refer to the instructions under
“Installation instructions”.
Should you need any spare parts, please order genuine MICROH parts from your local dealer.
IF YOU SHOULD EXPERIENCE ANY PROBLEMS OR ISSUES PLEASE CONTACT MICROH
PROFESSIONAL PRODUCTS BY EMAIL AT
In the event that your unit is defective in any way, please contact your local dealer to
obtain an RA number for service repair.
Disclaimer
:
MICROH
believes that the information contained in this manual is
accurate in all respects. However,
MICROH
assumes no responsibility for any errors or
omissions in this document.
MICROH
reserves the right to revise and make changes to
the content of this document without obligation that
MICROH
notify any person or
company of such revision or changes. This does not in any way constitute a commitment
by
MICROH
to make such changes.
MICROH
may issue a revision of this manual or a
new edition to incorporate such changes.
5
