HiLink User manual EN
–
v 1.0.1
24
6.1.3
The setting of the transmission devices
Depending on the function, the HiLink devices should be configured as follows:
Start
Intermediate
Finish
Settings
Lines
Line 1 = START
Mode
Mode= Normal
HiSmart Trigger= 1 Immediate
Settings
Lines
Line 1 = LAP 1 (or the next one)
Mode
Mode= Normal
HiSmart Trigger= 4 Very Far
Settings
Lines
Line 1 = STOP
Mode
Mode= Normal
HiSmart Trigger= 4 Very Far
You should also check that all the HiLink devices are set to the same GroupID and on the same transmission
frequency. See subsection
Error! Reference source not found.
for configuring these parameters.
It is recommended to perform a successful transmit-
receive check using the RTPro “Test Hardware” and “Test
Radio Signal” menu.
