1. Remove all packaging material. This includes the foam base and all
adhesive tape holding the refrigerator accessories inside and
outside. Slide out and remove plastic or foam guard used to
secure the compressor from shipping damage due to vibration
and shock.
2. Inspect and remove any remains of packing, tape or printed
materials before powering on the refrigerator.
• Your refrigerator has two leveling legs which are located in the front
corners of your refrigerator. After properly placing your refrigerator in
its final position, you can level your refrigerator.
• Leveling legs can be adjusted by turning them clockwise to raise your
refrigerator or by turning them counterclockwise to lower your
refrigerator. The refrigerator door will close easier when the leveling
legs are extended.
Installing Your Refrigerator
Unpacking Your Refrigerator
Assembly Instructions-Installation of Microwave Models
Remove all packaging material and accessories. Examine the oven for any
damage, such as dents or broken door. Do not install if oven is damaged.
1. Place the oven on top of the approved MicroFridge® refrigerator care-
fully lining up screw holes of the refrigerator sash with microwave side
holes.
• Do not block the inlet and outlet openings located at the rear and
bottom of the oven.
• Do not remove the feet from the bottom of the oven.
• Blocking the inlet and/or outlet openings can damage the oven.
2. Attach the microwave oven to the refrigerator by screwing in the 4 four
side and 1 rear srews.
• Six screws can be found in the attached bag.
Leveling Your Refrigerator
5
English
