Operators' Manual
Page 3 of 8 Rev. 2019-01
It shows S50 is connected with K6 battery bank.
2. Power on/off and adjust the brightness modes:
a)
Connect the handle controller to S50 via
the six-pin connector "Controller";
b)
Press the ON/OFF button in the bottom side of the handle controller, the default mode is 100% power with
a beam throw up to 5,500 m;
c)
ON/OFF button can also switch the modes.
From 100% power to 30% power:
Press and hold it for more than
3 seconds
,
the beam intensity will drop to 30% of its initial value
From 30% power to 100% power:
Press and hold the button, S50 will slowly come back up to 100% power from 30% power. There will
have more than 20 modes during process. Release the button to lock the brightness mode you need.
Strobe activation:
When S50 is off, press and then release the ON/OFF button after
1.5 seconds
, strobe will be activated.
Six-pin remote controller
connector socket
ON/OFF button
